Mova, a proud innovator
After many years of research and development, Mova has developed a manufacturing technology completely different from that used by North American pool manufacturers, which makes it possible to build stronger pools in an eco-responsible way: MovaMax technology.
Our pools feature monocoque composite structures reinforced with various materials with exceptional properties, using a process inspired by the manufacture of wind turbine blades and expedition sailboats.
As a result, they are highly resistant to:
- cracking
- freezing and thawing
- stress during installation
- water penetration causing osmosis
Over and above industry standards, our technologies are the fruit of a continuous process of innovation, optimization and satisfaction.
MovaMax injection technology exclusive to Mova pools
All North American manufacturers of fiberglass pools spray resin on the mold simultaneously with the fiberglass. Although this process is one of the most widespread, it has several drawbacks:
- The resin, when sprayed (in liquid form), comes into contact with the air and causes the emission of styrene solvents into the atmosphere, which is harmful for employees to breathe.
- Resin is a brittle material like glass, so it creates a fiberglass that is weaker, more brittle and more susceptible to cracking and breakage.
Mova has taken the time to develop a process that overcomes the shortcomings of the traditional pool manufacturing process:
- By infusing the resin in a vacuum environment, the styrene solvent present in the resin is trapped, thus emitting no toxic gases into the air. This process is therefore more eco-responsible, and contributes to providing our employees with a healthier and safer work environment.
- The MovaMax process ensures an optimum fiber/resin ratio. The fiberglass is compressed by the vacuum, optimizing the quantity of fiberglass in the composite. The result is a composite material that is stronger, less brittle and more resistant to flexion.
An optimal insulation process
Mova manufactures the best-insulated fibreglass pools on the market. Our triple-action insulation offers several advantages:
- Keeps your water warmer longer, by creating a barrier between your pool and the cold ground.
- Acts as a cushion under the pool to create protection against rocks in the ground, allowing you to enjoy a perfectly straight and soft comfortable bottom, without ever feeling rocks under the pool.
- Adds strength to the shell.
- Completely fills the voids under steps and benches, ensuring that even if the ground compacts over time, you won’t feel air pockets that otherwise create an unpleasant bouncing effect.
We insulate the walls of our pools with 1-inch-thick spray polyurethane foam. This foam has many advantages:
- It adheres completely to the surface of the walls and seeps into even the smallest cracks. There are no air spaces left between the insulation and the walls.
- Its R-7 insulation rating is the highest of all insulating materials.
- It is highly resistant to mold, and will not crush, settle or crumble. As it does not decompose, there is no risk of it contaminating the soil.
The bottom of our pools is insulated with an extruded type 4 polystyrene panel. This material has an insulation rating of R-5, which will help retain the heat of the water in your pool. Mova is the only manufacturer to offer this type of bottom insulation.
Our technicians pay special attention to spraying polyurethane foam under the steps and benches of all our pools. There’s so much polyurethane under the steps and benches that the horizontal surfaces under these areas become oblique, making backfilling easier for installers.
Mova is the only manufacturer to reinforce its steps and benches in this way, and you can rest assured that you’ll never feel a bounce in a Mova pool.
Diamond finish, unique to Mova
A high-gloss surface finish that’s comfortable and easy to maintain
All Mova pools feature a Diamond interior finish that will retain its original lustre for decades. This glossy, ultra-smooth, non-porous finish is unique to Mova pools. It makes all our pools much easier to maintain, as dirt adheres less to the finish, making the task of washing faster and less arduous.
Compared to a vinyl liner, our Diamond finish has no risk of being punctured and therefore requiring replacement. Compared with concrete plaster, it has the advantage of requiring no paint touch-up or redecoration. Last but not least, its original lustre can always be restored, even after 20 years.
Safety first in your Mova pool
All our pools feature contrasting anti-slip steps.
To provide the best possible safety for bathers, an anti-slip texture and a contrasting color are integrated into the steps during the molding of all our Mova pools. The anti-slip properties are maintained throughout the life of your pool.
Fiberglass pools comparison
Other retailers of fiberglass pools
Manufacturing process
Innovative MovaMax injection technology
Simultaneous basic spraying (chop)
Eco-friendly
Shapes
Round models
Clean, contemporary designs
Steps
Non-slip steps
Integrated contrast finish
Polyurethane backing under the steps and benches to avoid bounce and ease the installation
Colors
Standard colors
White and grey
Usually white
Other color choices
6 colors
0 to 4 colors
Insulation
Wall insulation
R-7 (1 po.)
Less than R-7 (1/4 po.)
Floor insulation R-4
Interior finish
High-gloss Diamond finish
Squarer, reinforced corners
Straight, non-tilted walls
Warranty
Leak-tightness
Lifetime
25 to 50 years
Pool structure and small cracks
25 years
Gel Coat
5 years
Sealing joints
5 years
Transferable warranty